-
New ceiling-mount type air purifier
The CAP-600 ceiling-mount air purifier is designed to be installed in the ceiling of home and workplace to save space.
The product is based on the electrostatic precipitation principle and it captures airborne pollutants, particles and contaminants as small as 0.01 micron and kills various microorganisms such as bacteria, viruses and fungus. The activated carbon filter eliminates many household odors. The UV-photo catalytic system destroys microorganisms and helps to remove chemical smells. The negative ion generator release high concentration level of negative ions to make the purified air fresh.
The CAP-600 ceiling-mount air purifier is ideal for office, hospital/clinic, and workplace applications where ceiling height from the drop ceiling to the ceiling above is more than 100cm.
Two stage electronic cell and smart check alarm system
The two-stage electronic cell successfully collects tiny particles down to 0.3 microns. The cell is reusable after cleaning and saves maintenance cost as compared to other types of air cleaning systems. The unit features a smart check alarm system that the unit CHECK light will beep and flash when electronic cell-high voltage system encounters a problem.
-
UV light-photo catalytic system
The unique combination of UV light and photo catalytic system not only massively kills microorganisms but also eliminates many kinds of chemical compounds and toxic gases.
Easy open front panel
The firmly fixed front panel just need slightly pressing the two switches located on the 2 sides of the unit to open and it is an important factor for the maintenance of ceiling-mount air purifiers.
- The washable metal mesh pre-filter captures large particles to contribute the other filters longer filter lifetime.
- The electronic cell discloses a negative charge to particles that pass through the unit and collects them on opposite charged metal plates. The electronic cell can capture particles down to a size of 0.01 micron. It is easy to clean and need low maintenance.
- The activated carbon filter locks in chemicals and odors.
- UV-C light can destroy airborne microorganisms such as bacteria, mold, and viruses.
- Photo catalyst can effectively reduce odors and restrain the activity of microorganisms. The use of photo catalyst is permanent and not need replacement.
- The negative ion generator releases the high concentration level of negative ions to make the air more pure and fresh.
Activated Carbon Filter
Activated carbon, also called activated charcoal, is composed of specially treated charcoal. When charcoal is oxygenated at a certain pressure, hundreds of thousands of pores forms on its surface. The pores on the surface area are available for adsorption of odors or toxic gases etc. Due to its huge amount of micro porosity, just one gram of activated carbon has a surface area in excess of 500m2, as determined by gas adsorption. The walls of the pores provide the surface layer essential for molecules adsorption.

-
Control Panel
-
Easy and low cost maintenance
- Open the filter cabinet and pull straight the pre filter. Clean the metal mesh pre filter by using a vacuum cleaner or rinse it. Dry the pre filter thoroughly before placing back into the unit.
- Once the cell plates become covered, their efficiency starts to diminish. It is necessary to clean the cell regularly. Take out the electronic cell from the filter cabinet. Cleaning the cell in the dishwasher or submerge it in the sink or bathtub. Dry the cell completely before putting back into the cabinet.
- Replace the carbon filter when the repace carbon filter indicator light flashes.
- Replace the UV lamp when the replace UV lamps indicator light flashes.


-
Specifications
Mode | CAP 600 |
Power Requirement |
a.c220V, 50Hz |
Rated Power |
Max. 96W |
Motor |
220V, 50Hz |
Noise Level |
<45dB (A) |
Negative Ion |
3x106/ cm3 |
UV Lamp |
2x6W |
Fuse |
a.c250V, 2A |
Main Parts |
Pre filter, electronic cell, activated carbon filter,
UV lamp and photo catalyst, negative ion generator |
Dimensions |
W630mm x D630mm x H300mm |
Weight |
25.05 kg |
Speed |
3 speeds |
Timer |
1hr, 2hr, 12hr |
Timer Cycle Mode |
Automatically stops 2 hours after 2 hours running, circulation in turn. |
Auto Mode |
The fan speed is automatically switched depending on the amount of pollution in the air. |
Alarm Light |
The indicator lights for cell cleaning, activated carbon filter replacement and UV lamp replacement. |
Power Chord |
3 phase detachable power cord, L=3m |
Operation |
Button operation, remote control operation |